click to enlarge

Idler Weight (lbs.) = 3.00 + (0.17 x Face Length)
Note: It is the customer's responsibility to advise of elevated temperatures or aggressive environments.
FACE
LENGTH		 QUANTITY UL-450-063
  1 2 3 4 or more
30" 960 833 743 Call for best pricing
36" 1013 880 787
42" 1066 928 833
48" 1118 974 878
54" 1171 1022 924
60" 1224 1069 968
66" 1277 1117 1014
72" 1356 1189 1082

Note Our New Idler Lengths:
Webex has simplified both ordering and pricing by grouping idler lengths in 12" increments. Idler lengths can be specified to any fraction of any inch.

Price and Delivery Note:
Prices are subject to change without notice. Delivery from stock based on prior commitments.

*Other shaft configurations and wall thicknesses optional.

 

Dead Shaft Ultralight Aluminum Idlers
Model UL-450-063 (4.5" nom. dia. roll)

Standard Specifications:

• 4.5" dia. x " wall 6061-T6 aluminum tubing machined for minimum stock removal and bored for 0.125" retained wall thickness
• 32 Ra finish on roll face
• Dynamically balanced at 1500 FPM
• O.D. and bore run out within 0.003"
• Straightness over face width within the greater of 0.002" or 0.0005"/ft. of length
• Low-friction bearings installed for a 0.625" dia. steel stub-shaft*
• Stub shafts included

See also:
Mounts
Custom Finishes

 

The UL Specifying Graph
Use the Specifying Graph on these pages to determine if your specifications fall within safe or acceptable parameters. The green band is the "go" or safe zone. The yellow band indicates "caution" — note the changes in deflection. You might want to explore other roll diameters or operating speeds. If your specifications fall in the red zone, call us. We can identify alternative roll specifications when we know more about your application.

 
 

Phone: 1-920-729-6666 • Fax: 1-920-725-9992
About Webex | Case Studies | Webline Diagram | Product Catalog | Technical Info | Contact Webex

© 2008 Webex, Inc.