Oven Applications
Oven applications are very common in the converting industry. In
an oven there are many process concerns and challenges.
First, the word oven or dryer indicates heat. Heat related concerns
include the following:
The temperature limitations and location of the bearings.
- Webex standard idler bearings are good up to 350°F.
- Other high temperature bearings are offered.
- Live shaft designs often have bearings mounted outside the heated
zone.
The temperature limitations of the roll materials.
- Aluminum should be avoided above 350°F.
The temperature limitations of the platings or coverings.
Thermal expansion.
- Both linear and radial expansion must be considered.
- Aluminum dead shaft rolls will require steel bearing inserts.
- Rolls mounted in bearings must be able to "float"
on one end.
Other design concerns include:
Solvents present in the drying process.
The drying process often involves many chemicals that will destroy
grease in bearings.
Drive components or tendency drive arrangement.
Oven designs often have very little wrap on the rolls; therefore
a drive may be required. If a roll is tendency driven, special considerations
must be given to the shaft design.
|
