Webex Inc. Idler rolls and heat transfer rolls for web converting

Standard Steel Shafts

Pricing for Stainless Steel Shafts is based upon the following pricing for our carbon Steel Shafts, with a cost factor added to account for the higher material costs of Stainless.

DESCRIPTION	LENGTH	QUANTITY
		1	2-4	5-10
3/4" Diameter Shaft Ends Faced and Chamfered	to 24"	$41	$37	$35
	to 36"	$44	$40	$37
	to 48"	$47	$42	$40
	to 60"	$52	$47	$43
1" Diameter Shaft Ends Faced and Chamfered	to 36"	$43	$40	$37
	to 48"	$49	$44	$42
	to 72"	$58	$52	$49
1-1/4" Diameter Shaft Ends Faced and Chamfered	to 36"	$56	$50	$48
	to 48"	$67	$60	$56
	to 72"	$79	$71	$67
	to 96"	$96	$86	$82
1-1/2" Diameter Shaft Ends Faced and Chamfered	to 36"	$59	$54	$50
	to 48"	$76	$69	$65
	to 72"	$94	$85	$80
	to 96"	$114	$103	$96
	to 120"	$133	$120	$113
2" Diameter Shaft Ends Faced and Chamfered	to 48"	$107	$96	$91
	to 72"	$137	$123	$116
	to 96"	$168	$151	$143
	to 120"	$196	$177	$137

Use the following table for pricing Stainless Steel Shafts:

DIAMETER	PRICE PER INCH (PPI)
3/4"	$0.99
1"	$1.06
1-1/4"	$1.67
1-1/2"	$2.26
2"	$3.93

Pricing Formula: (L X PPI) + Base Price = Shaft Price
where:	L = Length of the Stainless Shaft PPI = Price Per Inch from table at left Base Price = base price for the same size/length carbon steel shaft (same quantity bracket).
Pricing Example: (1) 1.5" dia. 36" long stainless steel shaft
	(36" X $2.26) + $59.00 = $140.36* each *Please round to the nearest dollar.

Other Information:

SHAFT WEIGHTS: STEEL and STAINLESS STEEL
Diameter	3/4"	1"	1-1/4"	1-1/2"	2"
Wt. / In.	.125 lbs.	.233 lbs.	.348 lbs.	.501 lbs.	.890 lbs.

DRILLING and TAPPING SPECIFICATIONS
3/4" Diameter Shaft	3/8" - 16" X 3/4" Deep	Add $30.00 to drill and tap both ends of shaft.
1" Diameter Shaft 1-1/4" Diameter Shaft 1-1/2" Diameter Shaft	1/2" - 13" X 1" Deep
2" Diameter Shaft	3/4" - 10" X 1" Deep