 |
 |
 |
Standard Steel Mounts
Split Flange Mounts Split flange mounts are available in sizes to fit a full range of shaft diameters. The split designs allows between-frame mounting and convenient replacement of idlers without disturbing alignment. Bottom half of closely dimensioned mount secures firmly to frame. Top of mount is fastened to bottom half with heavy steel bolts. Available for all standard shaft diameters. |
 click to enlarge |
| Nom
Dia. of Shaft |
A | B | C | D | E (+.001) |
F | G | H | J | K | Part No. |
| 1/2" | .502" .500" |
4" | 2" | 3/4" | 1.125" | 1-1/2" | 2-17/32" | 1-9/16" | 3-1/8" | 7/16" | 4891-000-B050 |
| 5/8" | .627" .625" |
4" | 2" | 3/4" | 1.125" | 1-1/2" | 2-17/32" | 1-9/16" | 3-1/8" | 7/16" | 4891-000-B063 |
| 3/4" | .752" .750" |
4" | 2" | 3/4" | 1.125" | 1-1/2" | 2-17/32" | 1-9/16" | 3-1/8" | 7/16" | 4891-000-B075 |
| 1" | 1.002" 1.000" |
4" | 2" | 3/4" | 1.125" | 1-1/2" | 2-17/32" | 1-9/16" | 3-1/8" | 7/16" | 4891-000-B100 |
| 1-1/4" | 1.252" 1.250" |
4" | 2" | 3/4" | 1.125" | 1-1/2" | 2-17/32" | 1-9/16" | 3-1/8" | 7/16" | 4891-000-B125 |
| 1-1/2" | 1.502" 1.500" |
5" | 2-1/2" | 1-1/4" | 1.625" | 2" | 3-13/32" | 1-7/8" | 3-3/4" | 9/16" | 4892-000-B150 |
| 2" | 2.002" 2.000" |
5" | 2-1/2" | 1-1/4" | 1.625" | 2" | 3-13/32" | 1-7/8" | 3-3/4" | 9/16" | 4892-000-B200 |
| This table supercedes the dimensions in the Webex Idler Master Catalog effective 07/01/00 | |||||||||||
Quickie Mounts The quickie mount is a simple idler shaft mount that allows a great deal of flexibility for positioning, leveling and proper alignment. You can utilize these mounting blocks wherever you would normally employ pillow block bearings. Available for most standard shaft diameters. |
 click to enlarge |
| Nom.
Dia. of Shaft |
A | B | C | D | E | F | G | H | I | J | Part No. |
| 3/4" | 1-3/16" | 4-1/2" | 3-1/2" | 1-3/8" | 5/8" | 7/16" | 1/2" | 2-1/16" | 1/4"-20 | 1-3/4" | 007-002-6 |
| 1" | 1-5/16" | 5" | 3-3/4" | 1-3/8" | 5/8" | 7/16" | 1/2" | 2-5/16" | 1/4"-20 | 2" | 007-002-1 |
| 1-1/4" | 1-7/16" | 5-1/2" | 4-1/8" | 1-3/8" | 5/8" | 7/16" | 1/2" | 2-9/16" | 1/4"-20 | 2-1/4" | 007-002-2 |
| 1-1/2" | 1-9/16" | 6-1/2" | 4-3/4" | 1-1/2" | 7/8" | 9/16" | 1/2" | 2-13/16" | 3/8"-16 | 2-1/2" | 007-002-3 |
| 2" | 1-13/16" | 6-1/2" | 5" | 1-1/2" | 7/8" | 9/16" | 5/8" | 3-5/16" | 3/8"-16 | 3" | 007-002-5 |
| This table supercedes the dimensions in the Webex Idler Master Catalog effective 07/01/00 | |||||||||||
Rigid Mounts Rigid mounts are a split-housing type of shaft mount. Unlike the "Quick Mount," rigid mounts do not provide any self-alignment. They must be mounted on flat and parallel surfaces or shimmed accordingly. Rigid mounts support the shaft ends rigidly, reducing natural shaft deflections and bearing side thrust. The top half of the mount can be removed to change rolls without disturbing alignment. These are excellent mounts for applications with heavy loads and long-shafted rolls. Available for most standard shaft diameters. |
 click to enlarge |
| Nom.
Dia. of Shaft |
A | B | C | D | E | F | G | H | I | J | K | Part No. |
| 1/2" | 9/16" | 2-3/4" | 2-1/8" | 5/8" | 5/16" | 3/16" | 5/16" | 1-1/8" | 1/4"-20 | 1-7/16" | 1" | 1460-000-A |
| 5/8" | 13/16" | 3-3/4" | 2-7/8" | 1" | 1/2" | 5/16" | 1/2" | 1-5/8" | 1/4"-20 | 2" | 1-1/2" | 1461-000-A |
| 3/4" | 13/16" | 3-3/4" | 2-7/8" | 1" | 1/2" | 5/16" | 1/2" | 1-5/8" | 1/4"-20 | 2" | 1-1/2" | 1462-000-A |
| 1" | 1-1/8" | 5" | 3-3/4" | 1-1/4" | 5/8" | 7/16" | 5/8" | 2-1/4" | 5/16"-18 | 2-1/2" | 2" | 1463-000-A |
| 1-1/4" | 1-3/8" | 6" | 4-1/2" | 1-1/2" | 3/4" | 9/16" | 3/4" | 2-3/4" | 3/8"-16 | 3" | 2-1/2" | 1464-000-A |
| 1-1/2" | 1-3/8" | 6" | 4-1/2" | 1-1/2" | 3/4" | 9/16" | 3/4" | 2-3/4" | 3/8"-16 | 3" | 2-1/2" | 1465-000-A |
| This table supercedes the dimensions in the Webex Idler Master Catalog effective 07/01/00 | ||||||||||||
Phone: 1-920-729-6666 • Fax: 1-920-725-9992
About Webex | Case Studies | Webline Diagram | Product Catalog | Technical Info | Contact Webex
© 2008 Webex, Inc.