Webex Inc. Idler rolls and heat transfer rolls for web converting

click to enlarge

Idler Weight (lbs.) = 2.67 + (0.09 x Face Length)
Note: It is the customer's responsibility to advise of elevated temperatures or aggressive environments.

FACE LENGTH	QUANTITY DSC-400-063
	1	2	3	4 or more
44"	$839	$735	$727	Call for best pricing
54"	$970	$849	$841
64"	$1047	$917	$908
74"	$1220	$1105	$1094
84"	$1399	$1316	$1296
94"	$1690	$1623	$1590

Note Our New Idler Lengths:
Webex has simplified both ordering and pricing by grouping idler lengths in 6" increments. Idler lengths can be specified to any fraction of any inch.

Price and Delivery Note:
Prices are subject to change without notice. Delivery from stock based on prior commitments.

*Other shaft configurations and wall thicknesses optional.

Dead Shaft Carbon Fiber Composite Idlers
Model DSC-400-063 (4" nom. dia. roll)

Standard Specifications:

•	4" dia. x 0.125" wall carbon fiber composite tubing machined for minimum stock
•	32 Ra finish on roll face
•	Dynamically balanced up to 3000 FPM
•	O.D. and bore run out within 0.003"
•	Straightness over face width within the greater of 0.002" or 0.0005"/ft. of length
•	Low-friction bearings installed for a 0.625" dia. steel stub-shaft*

The DSC Specifying Graph
Use the Specifying Graph on these pages to determine if your specifications fall within safe or acceptable parameters. The light blue bands identify the maximum safe operating speeds for given load and face widths. If your criteria places you in the yellow band, call the Webex customer support team to assist you in sizing your roll. If your specifications place you near band borders — or do not fit the parameters suggested in these graphs — call us for help. Have information ready on speed, web tension and wrap angles.