| MODEL A-200-075 |
|
| MODEL |
A |
SHAFT |
| A-350-125 |
23/32" |
1.250" |
| A-350-150 |
13/16' |
1.500" |
|
|
STANDARD SPECIFICATIONS:
- 2" dia. x 1/4" wall 6061-T6 aluminum tubing machined for minimum stack removal
- 32 Ra finish on roll face
- Dynamically balanced at 1000 FPM
- O.D. and bore run out:
 face length to 28" within 0.002"
face length to 36" within 0.003"
- Straightness over face width within the greater of 0.002" or 0.0005"/ft. of length
- Low-friction beareings installed for a 3/4" dia. shaft.
|
|
Idler Weight (lbs.) = 0.92 + (0.11 x Face Length)
Note: It is the customer's responsibility to advise of elevated temperatures or aggressive environments. |
See Custom Finishes if your process
or application requires more than the
standard specifications presented here. |
FACE
LENGTH |
QUANTITY A-200-075 |
| 1 |
2 |
3 |
4 OR MORE |
| Up to 18" |
$231 |
$187 |
$158 |
Call for our best pricing. |
| 24" |
$244 |
$198 |
$166 |
| 30" |
$265 |
$216 |
$179 |
| 36" |
$281 |
$231 |
$190 |
| 42" |
$295 |
$244 |
$199 |
|
| Specify & Order |
 |
| Back to Model Listing |
Note Our New Idler Lengths
Webex has simplified both ordering and pricing by grouping idler lengths in 6" increments. Idler lengths can be specified to any fraction of any inch. |
|
