Webex Inc. Idler rolls and heat transfer rolls for web converting

click to enlarge

Idler Weight (lbs.) = 11.36 + (1.74 x Face Length)
Note: It is the customer's responsibility to advise of elevated temperatures or aggressive environments.

FACE LENGTH	QUANTITY CR-600-200
	1	2	3	4 or more
36"	$1,678	$1,538	$1,486	Call for best pricing
48"	$1,914	$1,774	$1,704
60"	$2,150	$2,009	$1,922
72"	$2,202	$2,245	$2,140
84"	$2,621	$2,481	$2,358
96"	$2,856	$2,716	$2,576
108"	$3,092	$2,952	$2,794

Dead Shaft Stainless Steel Idlers
Model CR-600-200 (6" nom. dia. roll)

Standard Specifications:

•	6" dia. x 0.375" wall 304 stainless steel tubing machined for minimum stock removal
•	32 Ra finish on roll face
•	Dynamically balanced at 2000 FPM
•	O.D. and bore run out within 0.005"
•	Straightness over face width within the greater of 0.002" or 0.0005"/ft. of length
•	Low-friction bearings installed for a 2" dia. shaft*

Note Our New Idler Lengths:
Webex has simplified both ordering and pricing by grouping idler lengths in 6" increments. Idler lengths can be specified to any fraction of any inch.

Price and Delivery Note:
Prices are subject to change without notice. Delivery from stock based on prior commitments.

*Other shaft configurations and wall thicknesses optional.