Webex Inc. Idler rolls and heat transfer rolls for web converting

click to enlarge

Idler Weight (lbs.) = 9.80 + (0.95 x Face Length)
Note: It is the customer's responsibility to advise of elevated temperatures or aggressive environments.

FACE LENGTH	QUANTITY CR-500-200
	1	2	3	4 or more
36"	$1,157	$1,087	$1,052	Call for best pricing
48"	$1,295	$1,225	$1,190
60"	$1,433	$1,363	$1,328
72"	$1,571	$1,501	$1,466
84"	$1,708	$1,638	$1,603
96"	$1,846	$1,776	$1,741
108"	$1,984	$1,914	$1,879

Dead Shaft Stainless Steel Idlers
Model CR-500-200 (5" nom. dia. roll)

Standard Specifications:

•	5" dia. x 0.25" wall 304 stainless steel tubing machined for minimum stock removal
•	32 Ra finish on roll face
•	Dynamically balanced at 2000 FPM
•	O.D. and bore run out within 0.005"
•	Straightness over face width within the greater of 0.002" or 0.0005"/ft. of length
•	Low-friction bearings installed for a 2" dia. shaft*

Note Our New Idler Lengths:
Webex has simplified both ordering and pricing by grouping idler lengths in 6" increments. Idler lengths can be specified to any fraction of any inch.

Price and Delivery Note:
Prices are subject to change without notice. Delivery from stock based on prior commitments.

*Other shaft configurations and wall thicknesses optional.